How to maintain remote control airplanes batteries

Battery is the power source remote control airplanes, generally in the case of a fully charged battery , remote control airplane flight time of no more than half an hour, It also has been plagued battery is an important problem. When we can not fundamentally solve this problem, We can only be made to better protect the flight time guaranteed, if you're ready to do not use the remote control plane for a long time, how should we to save battery?
Airplanes are lithium batteries if you want to save time, then be sure to bring the battery is charged only saved because the remote control airplane remote control helicopter or batteries are lithium batteries and lithium battery will gradually decay with the passage of time and lithium Once the low battery voltage is not stable it will damage the battery charge into a remote-controlled aircraft so if you want a more long battery must be fully charged before storing it will be more secure.

If the battery is not in use during the period of protection is not well, then when you come to play it again, you will find the battery time is getting shorter and durable, serious or even making the battery charge is not into power, so it a piece of waste batteries in when you do not play for a long time to get everyone's remote control aircraft for longer battery playing time, take out the battery is best kept separate, there is two or three months we will be the hub of electricity every time, but do not charge too long, but the best play is often remotely piloted aircraft put to use what is best.
Avoid full power storage. When not used for long, lithium batteries should be removed and placed in a cool dry place. Do not cut frozen, to avoid moisture erosion. Avoid using the car in high temperatures. If long-term storage, the battery charge to 40% after the placement, or the voltage stored between 3.75-3.85V.
To charge the battery, it is best to use a small electric current to charge, usually with 0.5C-2C charging current small little irritating to better preserve battery.

Avoid overcharge and over discharge, charging cut-off voltage is generally set for: 4.25V, discharge cut-off voltage: about 3.0V, discharge cut-off voltage, but also according to the actual situation, such as playing violent 3D, then the discharge cut-off voltage of the most good set at about 3.4V, below this value, it is easy to put off the moment caused a whole battery over-discharge.
These are the maintenance and use of the battery has been generally accepted methods, if you want to know more maintenance tips, then go to rctophobby.com.